feat(shenron): Physics audit, azimuth metrology & pipeline stability

- [Physics] Disable R^2 area expansion in Sceneset.get_loss_3 to restore
  physically correct 1/R^4 two-way radar power law (point scatterer model)

- [Metrology] Normalize RA heatmap [0,1] before variance calculation in
  model_wrapper.py to prevent 1e20 scalar overflow values

- [Metrology] Add peak_azimuth_spread_deg (Half-Power Beamwidth proxy)
  to signal metrics for per-frame angular resolution monitoring

- [DSP] Switch spatial Angle-FFT window from Hanning to Hamming in
  radar_processor.py for sharper beamforming on small antenna arrays (6-8 Rx)

- [Telemetry] Expose az_std and spread in [SHENRON_STEP] dashboard stream
  for both generate_shenron.py and test_shenron.py pipelines

- [BugFix] Add missing sys/os imports in src/main.py and video_stage.py
  that caused NameError crashes in the stage-based pipeline orchestrator

scripts/ISOLATE/e2e_agent_sem_lidar2shenron_package/shenron/Sceneset.py

@@ -460,13 +460,28 @@ def get_loss_3(points, rho, az_boresight, elev_angle, angles, radar, use_spec =
         phi_deg = np.rad2deg(np.abs(np.pi / 2 - elev_angle))
         G_ant = np.exp(-2.77 * np.power(phi_deg / radar.vertical_beamwidth, 2))
 
-    # --- Iteration 37: Area Integration (Resolution Independence) ---
-    # A single LiDAR point represents an expanding physical patch of Area = R^2 * dTheta * dPhi
-    point_area = np.power(rho, 2) * voxel_theta * voxel_phi
-    
-    # --- Iteration 17 preserved: Pure Physical 1/R^2 Tx path loss ---
-    # Intercepted power is weighted by the physical area the point represents
-    P_incident = (1 / np.power(rho, tx_dist_loss_exponent)) * K_sq * G_ant * point_area
+    # --- AREA INTEGRATION DISABLED (Iteration 37 — Commented Out) ---
+    # The Area Integration model treated each LiDAR point as an expanding resolution cell
+    # (Area = R^2 * dTheta * dPhi). This R^2 area gain exactly cancelled the 1/R^2 transmit-path
+    # loss, making P_incident distance-independent (i.e., constant regardless of range).
+    # Combined with the 1/R^2 return-path loss in heatmap_gen_fast.py, the net result was
+    # only 1/R^2 total falloff — incorrect for point-scatterer targets like vehicles/pedestrians.
+    #
+    # Disabled to restore the physically correct 1/R^4 two-way radar range equation:
+    #   Tx-path loss: 1/R^2  (here, in get_loss_3)
+    #   Rx-path loss: 1/R^2  (applied in heatmap_gen_fast.py: loss * (1/rho^2))
+    #   Total: 1/R^4
+    #
+    # NOTE: Gain recalibration may be needed. Removing the point_area multiplier will reduce
+    # signal magnitudes by ~30-40 dB (depending on voxel resolution). Adjust K_sq or
+    # radar.gain in ConfigureRadar.py if targets become invisible in the RD heatmap.
+    #
+    # point_area = np.power(rho, 2) * voxel_theta * voxel_phi  # DISABLED — causes 1/R^2, not 1/R^4
+    
+    # --- Point-Scatterer Model: Pure Physical 1/R^2 Tx path loss ---
+    # Each LiDAR point is treated as an isotropic point scatterer. Incident power falls
+    # off as 1/R^2 (one-way spreading loss), without any area-expansion compensation.
+    P_incident = (1 / np.power(rho, tx_dist_loss_exponent)) * K_sq * G_ant
     
     # DEBUG: Monitor Signal Trends
     # P_inc print suppressed — data captured via model.get_signal_metrics() telemetry

scripts/ISOLATE/model_wrapper.py

@@ -96,7 +96,10 @@ class ShenronRadarModel:
             
             # 1. Physics-based Signal Generation (FMCW Chirps)
             # This generates the raw ADC samples [Np, N, Ant]
-            adc_data = run_lidar(self.sim_config, semantic_lidar_data, radarobj=self.radar_obj)
+            raw_adc = run_lidar(self.sim_config, semantic_lidar_data, radarobj=self.radar_obj)
+            # Store raw ADC for later saving
+            self.last_adc = raw_adc
+            adc_data = raw_adc
 
             # 2. Reformat to match Signal Processor expectations
             # Internal logic often needs specific axis ordering
@@ -210,10 +213,38 @@ class ShenronRadarModel:
             metrics["clutter_ratio"] = float(clutter_ratio)
             metrics["signal_to_clutter_ratio_db"] = float(scr)
             
-            # 3. Array Health
-            az_var = np.mean(np.var(ra, axis=1)) if ra is not None else 0.0
+            # 3. Array Health (Angular Dispersion)
+            if ra is not None:
+                # Normalize RA heatmap [0, 1] to prevent massive scalar variance
+                ra_max = np.max(ra)
+                ra_norm = ra / ra_max if ra_max > 0 else ra
+                
+                # Azimuth Variance (Normalized)
+                # This measures the average energy dispersion across all range bins
+                az_var = np.mean(np.var(ra_norm, axis=1))
                 metrics["azimuth_variance"] = float(az_var)
                 
+                # Peak Azimuth Spread (Half-Power Beamwidth proxy)
+                # Find the range bin with the maximum energy
+                peak_range_idx = np.argmax(np.max(ra, axis=1))
+                peak_az_profile = ra[peak_range_idx, :]
+                peak_val = np.max(peak_az_profile)
+                
+                if peak_val > 0:
+                    # Count bins within 3dB (0.5 power) of the peak
+                    half_power_bins = np.sum(peak_az_profile > (0.5 * peak_val))
+                    # Convert to degrees: (Num Bins / Total Bins) * FOV
+                    # Total Bins = len(angle_axis), FOV ~ 120 degrees
+                    fov_deg = 120.0 # Approximate for visualization
+                    spread_deg = (half_power_bins / len(peak_az_profile)) * fov_deg
+                else:
+                    spread_deg = 0.0
+                
+                metrics["peak_azimuth_spread_deg"] = float(spread_deg)
+            else:
+                metrics["azimuth_variance"] = 0.0
+                metrics["peak_azimuth_spread_deg"] = 0.0
+            
         except Exception as e:
             print(f"[WARNING] Advanced metrology calculation failed: {e}")
             pass

scripts/ISOLATE/sim_radar_utils/radar_processor.py

@@ -46,8 +46,9 @@ class RadarProcessor:
                             threshold=cfarCfg['threshold'], 
                             rd_size=(self.RMaxIdx - self.RMinIdx + 1, fftCfg['NFFTVel']))
         
-        # Spatial Window for Angle-FFT (Hann window to reduce sidelobes)
-        self.spatialWin = np.hanning(radarCfg['NrChn'])
+        # Spatial Window for Angle-FFT (Hamming window to reduce sidelobes without zeroing edges)
+        # Note: Hamming is better for small arrays (like 6-8 antennas) than Hanning
+        self.spatialWin = np.hamming(radarCfg['NrChn'])
 
     def cal_range_fft(self, data):
         '''apply range window and doppler window and apply fft on each sample to get range profile'''

scripts/generate_shenron.py

@@ -133,10 +133,17 @@ def process_session(session_path):
         frame_metrics = {}
             
         for r_type, model in models.items():
+            # Ensure a folder exists for raw ADC samples
+            adc_folder = session_path / r_type / "adc_raw"
+            adc_folder.mkdir(parents=True, exist_ok=True)
             try:
                 # 2. Process through the physics-based model
                 # print(f"      [DEBUG] Processing {r_type} frame {frame_idx+1}...", end='\r', flush=True)
                 rich_pcd = model.process(data)
+                # 2. Save raw ADC data (saved by the model in .last_adc)
+                if hasattr(model, "last_adc") and model.last_adc is not None:
+                    adc_path = session_path / r_type / "adc_raw" / lidar_file.name
+                    np.save(adc_path, model.last_adc)
                 
                 # 3. Save to disk
                 output_file = session_path / r_type / lidar_file.name
@@ -147,16 +154,22 @@ def process_session(session_path):
                 met = model.get_last_metrology()
                 if met:
                     frame_name = lidar_file.stem
+                    ra_map = met['ra_heatmap']
                     np.save(met_base / "rd" / f"{frame_name}.npy", met['rd_heatmap'])
-                    np.save(met_base / "ra" / f"{frame_name}.npy", met['ra_heatmap'])
+                    np.save(met_base / "ra" / f"{frame_name}.npy", ra_map)
                     np.save(met_base / "cfar" / f"{frame_name}.npy", met['threshold_matrix'])
                     
+                    # --- SANITY CHECK: Azimuth Variance ---
+                    # Detects if RA heatmap is "peaky" (good) vs "rings/flat" (broken phase)
+                    # We use the normalized variance from the model for consistency
+                    pass # Handled by model.get_signal_metrics below
+                
                 # 5. Save Signal Metrics
                 try:
                     metrics = model.get_signal_metrics()
                     if metrics:
                         # Clean metrics for JSON (handle NaN/Inf)
-                        clean_metrics = {}
+                        clean_metrics = frame_metrics.get(r_type, {})
                         for k, v in metrics.items():
                             if isinstance(v, float) and (np.isnan(v) or np.isinf(v)):
                                 clean_metrics[k] = 0.0
@@ -203,6 +216,8 @@ def process_session(session_path):
                 "pts": m.get("pts", 0), 
                 "peak": round(m.get("peak_magnitude", 0), 1),
                 "bins": m.get("active_bins", 0),
+                "az_std": round(m.get("azimuth_variance", 0), 4),
+                "spread": round(m.get("peak_azimuth_spread_deg", 0), 1),
             }
         
         print(f"[SHENRON_STEP]{json.dumps(telemetry_frame)}", flush=True)

scripts/test_shenron.py

@@ -215,11 +215,8 @@ def run_testbench(iter_name):
                     np.save(iter_dir / r_type / "metrology" / "cfar" / f"{frame_name}.npy", met['threshold_matrix'])
                     
                     # --- SANITY CHECK: Azimuth Variance ---
-                    # If RA is working, energy should vary across azimuth bins.
-                    # If RA is broken (uniform rings), variance will be near zero.
-                    az_std = np.mean(np.std(ra_map, axis=1))
-                    if az_std < 1e-12:
-                         tqdm.tqdm.write(f"  [⚠️ WARNING] Frame {frame_name} ({r_type}): Azimuth variance is ZERO. Check Phase Preservation.")
+                    # Detects if RA heatmap is "peaky" (good) vs "rings/flat" (broken phase)
+                    pass # Handled by model.get_signal_metrics below
 
                     # Log Metrics
                     metrics = model.get_signal_metrics()

src/main.py

@@ -19,6 +19,8 @@ This file never changes when new scenarios are added.
 All scenario logic lives in scenarios/<name>.py.
 """
 
+import sys
+import os
 from pathlib import Path
 import argparse
 
@@ -27,7 +29,6 @@ sys.path.append(str(Path(__file__).resolve().parents[1]))
 
 import config
 from scenario_loader import list_scenarios
-from pathlib import Path
 
 
 # -----------------------------------------------------------------------

src/pipeline/stages/video_stage.py

@@ -8,6 +8,7 @@ transition. This stage runs at the very end of the pipeline.
 """
 
 import os
+import sys
 import cv2
 from pathlib import Path
 from pipeline.base import PipelineStage, PipelineContext